New Products!
| Barrels | |||||||||
| BOTTLENECKS | |||||||||
 |
|||||||||
| A unique way to customize your Javelin, or any cocker-threaded, barrel for the paint you are using TODAY, the bottleneck tapers on the inlet side and the exit side with a smooth radius transition in the middle. | |||||||||
610 |
.678 Bottleneck | $20 | |||||||
611 |
.680 Bottleneck | $20 | |||||||
612 |
.682 Bottleneck | $20 | |||||||
613 |
.684 Bottleneck | $20 | |||||||
614 |
.686 Bottleneck | $20 | |||||||
615 |
.688 Bottleneck | $20 | |||||||
616 |
Combo Kit - all six | $100 | |||||||
| Regulators | |||||||||
| SIDEWINDER with BLACK FINGER GRIP | |||||||||
 |
|||||||||
| This regulator features contour middle body to fit your fingers. The internals are our standard Sidewinder parts. | |||||||||
910-L |
Sidewinder with Black Finger Grip | $80 | |||||||
910-M |
Sidewinder with Black Finger Grip | $80 | |||||||
910-S |
Sidewinder with Black Finger Grip | $80 | |||||||
| SST - SOLID STOP TECHNOLOGY | |||||||||
 |
|||||||||
|
SOLID STOP TECHNOLOGY
The SST™ regulator is the newest development in regulator design. Most regulators are not consistent under extreme use. The reason for this is that most have soft seats and therefore the sealing surface is always at a different location (height). The SST™, at rest, seals on a small hard o-ring that can be crushed only a small amount before the seat holder contacts a hard surface (solid stop).
In-house testing shows the SST™ delivers air efficiently and directly because of its smooth route from the inlet on the swivel to the hole in the piston. Therefore, when shooting paint, the consistency is excellent. If you need consistency, high flow, and reliability the SST™ is a great choice.
The bottom is removable by putting the main body in a collet or strap wrench and using a 7/8” 12-point box end wrench to unscrew the bottom from the main body. The adjuster has a 5/32 allen wrench hole in the end. The SSTs™ have been designed to give you the best performance in a very simple assembly that can be rebuilt by the end user. The tops are the typical Sidewinder ™ tops.
Model: SST™ REV 0 Gas source: Compressed air, Nitrogen, or CO2 with an anti-siphon tube and a bottom line regulator Length: (short 3.0”), (med 3.5”), (long 4.0”) outside marker Diameter: 1.0”, (over swivel 1.25”) Weight: .22 lbs Output pressure: 0-400 psi Max input: 900 psi Maintenance: Put a couple of drops of Extreme Lube in the air intake when you play. |
|||||||||
1000-L |
SST Regulator | $85 | |||||||
1000-M |
SST Regulator | $85 | |||||||
1000-S |
SST Regulator | $85 | |||||||
| Merlin Kit | |||||||||
| MERLIN | |||||||||
 |
|||||||||
112 |
F-4 Wire Nubbin | $500 | |||||||
113 |
Dual Detent, Delrin balls | $500 | |||||||
114 |
Screw-in Single detent | $500 | |||||||
115 |
Single detent | $500 | |||||||
| Cocker-Style Stainless Steel Ball Detent | |||||||||
 |
|||||||||
| This screw-in ball detent features the Viking Delrin ball detent and spring. | |||||||||
125 |
Cocker Style Ball Dentent | $25 | |||||||
F-4 WIRE NUBBIN |
|||||||||
Keep the paintball from rolling out the barrel |
|||||||||
|
|||||||||
If you have any difficulty using our site, please call us immediately at 317-631-7200 or e-mail us at store@akapaintball.com so we can correct the problem.
